Boom Skinner Pro complete KIT- Special DEAL
Boom
$199.95
(No reviews yet)
Write a Review
Boom
Boom Skinner Pro complete KIT- Special DEAL
Boom Skinner Pro complete KIT
Super deal very limited numbers
R/R $299.95 now $100 off at $199.95
Description
Boom Skinner Skateboard Bundle.
• 1x Boom Wallace 8.0 Pro Deck
• 1 Pair Silver™ Brand 8.0 Trucks.
• 4x Boom 53mm Skateboard Wheels
• Abec 5 Bearings, Mounting Hardware and Grip
FREE SKATE TOOL
How to assemble your skateboard
Attach grip tape to the top of your deck. Press the tape so that it lays flat along the entire deck, and then trim off excess tape using the razor.
Punch holes in your tape. Turn your board over and use the bolts from the hardware kit to punch holes in the tape.
Secure the trucks. Position your trucks on the board with their kingpins facing toward each other, and secure them in place with the bolts, using the skate tool to tighten the nuts.
Install your bearings. Each wheel needs two bearings to spin properly. Press a bearing into one side of your wheel until you feel it pop into place. Insert a bearing spacer into the wheel from the side that does not have a bearing, and then press a bearing onto the open side. Repeat for all four wheels.
Mount your wheels. Using the hardware that comes with your trucks, place a washer on an axle, then a wheel, then a second washer. Secure in place using a nut. Repeat for all four wheels.
• 1x Boom Wallace 8.0 Pro Deck
• 1 Pair Silver™ Brand 8.0 Trucks.
• 4x Boom 53mm Skateboard Wheels
• Abec 5 Bearings, Mounting Hardware and Grip
FREE SKATE TOOL
How to assemble your skateboard
Attach grip tape to the top of your deck. Press the tape so that it lays flat along the entire deck, and then trim off excess tape using the razor.
Punch holes in your tape. Turn your board over and use the bolts from the hardware kit to punch holes in the tape.
Secure the trucks. Position your trucks on the board with their kingpins facing toward each other, and secure them in place with the bolts, using the skate tool to tighten the nuts.
Install your bearings. Each wheel needs two bearings to spin properly. Press a bearing into one side of your wheel until you feel it pop into place. Insert a bearing spacer into the wheel from the side that does not have a bearing, and then press a bearing onto the open side. Repeat for all four wheels.
Mount your wheels. Using the hardware that comes with your trucks, place a washer on an axle, then a wheel, then a second washer. Secure in place using a nut. Repeat for all four wheels.
